Thermoplastics fittings. Determination of ring stiffness Ingestion-build-156411 With BS 3962-5 you can

With BS 3962-5 you can be ensured that the products consistently meet and exceed quality assurance targets

EN 16348 applies

Minimum yield strengths up to 460 MPa are specified together with low temperature impact properties at temperatures down to –40 °C

BS EN IEC 62885-5specifies a compliance test for the manufacturer to determine whether the high-pressure cleaners and steam cleaners complies with the technical standards

suitable for the storage of liquid and solid chemicals and reagents in general laboratory use

Thermoplastics fittings. Determination of ring stiffness Ingestion-build-156411 With BS 3962-5 you can1 Scope This International Standard specifies a method of determining the ring stiffness of bends and branches made from thermoplastic material and for use with plastics pipes having a circular cross section. The method can be used to determine the stiffness of bends, equal branches and unequal branches, provided the fitting allows a diametric deflection of at least 4 %. NOTE 1 If a fitting has the same wall thickness, wall construction, material and